Future engineering work

PAGE LAST UPDATED: 30/11/2020 08:43. Update now

See details of routes affected by planned engineering works, including when they take effect, maps of the affected area, alternative timetables, advice for alternative travel and real-time updates.

Revised morning / night service between Reading and Didcot Parkway on Saturday 14 November

Start date
14/11/2020  00:00
End date
15/11/2020 
Route affected

Great Western Railway between Reading and Oxford and also between London Paddington and Didcot Parkway

 
TOC(s) affected
Great Western Railway
Description

Engineering work is taking place between Reading and Didcot Parkway at various times on Saturday 14 November. 2 out of the 4 lines will be closed until 05:10 between Tilehurst and Didcot Parkway and between 23:10 and midnight between Reading and Didcot Parkway.

On Saturday 14 November, the following trains will not call at Pangbourne. They will also use alternative platforms at Tilehurst, Goring & Streatley and Cholsey:

  • 00:45 Oxford to Reading
  • 21:57, 22:58 and 23:28 London Paddington to Didcot Parkway
  • 23:45 Didcot Parkway to London Paddington

Replacement buses will run between Tilehurst and Pangbourne (a 10 minute journey time) to connect with the above amended trains. This is with the exception of the 21:57 London Paddington to Didcot Parkway service, where customers can use an alternative train to travel from Pangbourne to Tilehurst.

Check before you travel:

You can plan your journey using the National Rail Enquiries Journey Planner

Although journey planners are showing correctly, your journey may be subject to alteration at short notice due to the Coronavirus outbreak. Please check before your journey.

Replacement Bus Travel Advice:

For helpful advice if you need to travel on a rail replacement service, including accessibility and bicycle information, please use this page.

You can find the location of your bus replacement by checking station signs or by searching for your station on our station information pages.