Issue resolved: disruption between Bognor Regis and Barnham expected until 10:00 

Route(s) affected

Between Bognor Regis and Barnham

Description

Following a fault with the signalling system between Bognor Regis and Barnham, trains are now returning to normal.

Whilst service recovers, trains running between these stations may be delayed by up to 10 minutes or revised.

This is expected to cause disruption until 10:00.

Customer advice:

Services can now start to run normally between Bognor Regis and Barnham. There may be some residual disruption whilst service resumes.

Please ensure to check before you travel using our online journey planners and live departure boards for the latest information.

Planning your journey:

You can use the live departure boards.

You can view the live map of the network.

You can also see the alternative route guide.

The Southern app will also help you plan your journey.

Can you tell me more about the incident?

A track circuit failure is disrupting trains which travel from Bognor Regis to Barnham.

This part of the network uses track circuits to detect the position of trains. These are electrical systems which monitor whether a train is on a section of track. They operate as part of the signalling system, which is designed to be "fail safe".

When a track circuit fails, the signalling system will interpret this as a train remaining in place, even though there may not be a train present at all, or the previous service may have long since left the area.

As a result, further trains cannot be automatically allowed onto the relevant section of track. Train drivers will be stopped by red signals on approach. They will then get verbal permission from the signaller so that they can proceed, and will run at a heavily-reduced speed as far as the next signal. This is so that the drivers will stop safely if they see anything ahead of them.

In some areas, the sections between signals can be several miles long, so this can result in delays building up. Even with shorter sections of track affected, there would still be a delay of at least a few minutes to each journey.

Track circuit faults can be caused by a number of different issues, including electronic faults or obstructions on the track. Network Rail manage the signalling system, including track circuits, and their staff will be investigating as quickly as possible. We're closely monitoring progress updates, and we'd like to thank you for your patience.

Check before you travel:

You can check your journey using the National Rail Enquiries real-time Journey Planner.

Compensation:

You may be entitled to compensation if you experience a delay in completing your journey today. Please keep your train ticket and make a note of your journey, as both will be required to support any claim.